Auto Leveler – Landscaping Terraformer & Slopes v1.0.0.0
Auto Leveler – Landscaping Terraformer & Slopes v1.0.0.0
Tired of spending hours fighting the default landscaping tool, dealing with bumpy terrain, distorted hills, and endless money wasted trying to flatten an area for your farm?
The Auto Leveler completely transforms terraforming in Farming Simulator 25! Instead of manually dragging brushes for hours, simply mark the boundary corners of the desired zone, preview the elevation plane in real time, and press [Enter] to flatten the entire area in seconds with mathematical perfection.
How to Use / Activation Note:
To activate the Auto Leveler, enter the Construction Menu and ensure you are on the main overview/selection screen (without any active building or specific landscaping brush selected). Press [J] to open the mod interface and start creating your custom planes or ramps. If you have a building or landscaping tool currently selected, simply press [ESC] to return to the main construction menu screen, and then press [J] to activate the mod seamlessly.
Why use Auto Leveler?
– Save Countless Hours: Create large construction pads, yard expansions, and flat building sites in seconds instead of grinding with the manual brush.
– 100% Flat & Level: No uneven bumps, glitches, or holes under your sheds, silos, and factories.
– Smooth Transition Slopes: Say goodbye to vertical jagged terrain cuts with automatic edge blending (Talude) of 2m, 4m, or 6m.
– Perfect 3D Ramp Builder: Connect elevated yards and roads with precise slope percentage readouts and adjustable width.
– Financial Control: Real-time area (m²) and estimated cost preview before spending a single dollar.
Key Features:
– 3D Holographic Plane: Real-time elevation preview with volumetric posts showing the exact target height.
– Auto 90°/45° Alignment & Square: Smart magnetic snap and Neon Green guide line to align with Point 1 for flawless rectangles and squares.
– Easy Polygon Closing: Click directly on Point 1 or double-click anywhere to lock and close the area.
– Realistic Slope Smoothing (Talude): Vertical cut or smooth transitional slopes (2m, 4m, 6m) for natural terrain blending.
– 3D Ramp Builder: Start and end heights with adjustable road width (2m to 30m) and real-time slope percentage calculation.
– Dynamic Height Control: Raise or lower the entire flat plane or individual ramp points instantly using Up/Down Arrow keys.
– Live Financial & Area Telemetry: Real-time m² area calculation and estimated cost preview.
– Move & Adjust Points: Press ‘R’ to drag and adjust marked points directly on the ground.
Controls:
– [J]: Activate / Deactivate Auto Leveler (inside Construction Mode).
– [H]: Switch Mode (3D Flat Plane vs. 3D Ramp).
– [X]: Toggle Alignment (Free Drawing vs. 90°/45° Orthogonal Snap).
– [R]: Toggle Action (Add Points vs. Move/Drag Points).
– [T]: Cycle Edge Finish (Vertical Cut, 2m Slope, 4m Slope, 6m Slope).
– [Up Arrow] / [Down Arrow]: Increase / Decrease Height.
– [+] / [-]: Increase / Decrease Ramp Width.
– [Left Click]: Place point on terrain / Click Point 1 to close polygon.
– [Double Click]: Quick lock and fix polygon points.
– [Backspace] / [Right Click]: Undo last placed point.
– [Enter]: Apply terraforming to the terrain.
